Användare:
Lösenord:
Logga in mig automatiskt till Digital Catalogue i framtiden.
Nytt konto
Begär e-shop konto
Har du glömt ditt lösenord?
För att återställa ditt lösenord kan du presentera ditt e-shop användarnamn och e-postadress i rutorna nedan och följ instruktionerna Fyll i den e-postadress som tillhör ditt konto. Du kommer att få ett nytt lösenord skickat till din e-postadress.
 
Digital Catalogue - konto
E-shop konto
 
Användare:  
E-post:  
 
 
Inom de närmaste minuterna kommer du att få en e-post med dina nya kontouppgifter.
 
 
Det användarnamn och e-post som du angav är inte korrekt.

Det finns ingen användare med den e-post adressen.
 
warning
Användarnamnet eller lösenordet är inte giltigt.

 
Välkommen till SMC:s Mina sidor

För att säkerställa din maximala nivå av säkerhet, vänligen ändra lösenordet som har skickats till dig, genom att följa de enkla stegen nedan


Användare:
Gammalt lösenord:
Skriv in nytt lösenord:
Sex tecken minimum.Case känsliga
Upprepa nytt lösenord:
   
Vänligen fyll i uppgifterna i följande fält. Obligatoriska fält är markerade med *
 
Företagsnamn*:
Kund nr*:
Org nr*:
Förnamn*:
Efternamn*:
e-mail*:
Telefon*:
 
Tack för din registrering. Vi återkommer inom en arbetsdag.
 
There was some problem, the email couldn´t be sent.
 
warning
 
Sessionen har löpt ut
warning
 
Inloggning  |  
0
Produktval
| 
 
Artikelnummer
 
 
 

 

 
 
 
Se valda produkter
Se valda produkter


Välj land
Corporate Site
  • Produkter
    • Produktkatalog (engelska)

      Actuators

      Electric Actuators

      Directional Control Valves

      Airline Equipment

      Fittings & Tubing

      Vacuum Products

      Fluid Control Equipment

      Sensors & Switches

      Static Control

      Temperature Control

      High Vacuum Products

      Clean Room Products

      ATEX Products

      Nya produkter

      Visa nya produkter

      Förbättrade produkter

      Kommer snart

      Innovationer 2017/18

      Standardprodukter i lager
    • Aktuella produkter

      J-cylindrar

      Kompaktcylindrar

      ISO 15552 cylindrar

      Elektriska linjärenheter

      5-ports magnetventiler

      Säkerhetsventiler

      Seriella gränssnittslösningar

      Kyltorkar tryckluft

      Slangar

      Vacuum Solutions

      2-portsventiler

      Ionizers

      Cirkulationskylare

      Processgasventiler och regulatorer AP Tech

      Standarder och manualer

      Manualer

      Konfigurationsfiler

      Electric Actuator Controller Setting Tools

      Installations- och underhållsmanualer

      CE-märkning

      EU-direktiv

      RoHS-direktiv

    • Digitala verktyg för pneumatiska produkter
       
      Välj rätt utrustning för luftberedning

      Refrigerated Air Dryer Selector

      Air Tank Selector

      Booster Regulator Selector

      Konfigurera din luftberednings-enhet (FRL)

      Luftberedningskonfigurator

      Rita pneumatiska scheman

      Pneumatiska symboler

      EPLAN-bibliotek

      Övriga supportverktyg

      Charge/Discharge Tank Calculator

      Luftförbrukning / Beräkning av nödvändigt luftflöde

      Flödeskalkylator

      Energy Saving mjukvara

      CAD-filer och hjälpmedel

       
       
      Välj rätt givare och hantera inställningar

      Inställn digital tryckvakt

      Rita pneumatiska scheman

      Pneumatiska symboler

      EPLAN-bibliotek

      Övriga supportverktyg

      Luftförbrukning / Beräkning av nödvändigt luftflöde

      Flödeskalkylator

      Energy Saving mjukvara

      CAD-filer och hjälpmedel

       
       
      Välj rätt riktningsventil

      Val av modell

      Konfigurera ventilramp

      Ventilkonfigurator

      Rita pneumatiska scheman

      Pneumatiska symboler

      EPLAN-bibliotek

      Övriga supportverktyg

      Luftförbrukning / Beräkning av nödvändigt luftflöde

      Flödeskalkylator

      Energy Saving mjukvara

      CAD-filer och hjälpmedel

       
       
      Välj rätt koppling och slang

      Val av modell

      Rita pneumatiska scheman

      Pneumatiska symboler

      EPLAN-bibliotek

      Övriga supportverktyg

      Luftförbrukning / Beräkning av nödvändigt luftflöde

      Flödeskalkylator

      Energy Saving mjukvara

      CAD-filer och hjälpmedel

       
       
      Välj rätt cylinder och gripdon

      Val av modell

      Cylinderguide

      Shock Absorber Selector

      Digitala verktyg för vriddon

      Air Gripper Selector

      Konfigurera en cylinder med modifiering.

      Cylinderkonfigurator

      Rita pneumatiska scheman

      Pneumatiska symboler

      EPLAN-bibliotek

      Övriga supportverktyg

      Luftförbrukning / Beräkning av nödvändigt luftflöde

      Flödeskalkylator

      Moment of Inertia Calculator

      CAD-filer och hjälpmedel

      Digitala verktyg för övriga SMC-produkter

      Val av elektriska ställdon

      Val av vakuumkomponenter

      Val av 2 Portsventil

      Urvalsguide för Thermo Chillers

  • Lösningar
    • Fordonsindustri
      Elektronikindustri

      Solceller

      Life Science
    • Livsmedelsindustri

      Snack

      Beer

      Cheese

      Beverage

      Gruvindustri
    • Energy Saving
      Machine Safety
      Industry 4.0
      Utbildningsprogram
      Utbildningsavdelningen
  • Återförsäljare
  • Nyheter & Evenemang
    • Press

      Nyhetsrum Sverige

      Övriga nyheter

      Företagsprofil

      SMC historia

      Presskontakter

      Nyhetsbrev

      Nyhetsbrev Prenumeration

      Arkiv

      Mässor/Event
  • Om oss
    • Vilka vi är

      Vad motiverar oss

      SMC Sverige

      Vart vi finns

      SMC Internationellt

      Lokala säljkontor

  • Arbeta på SMC
    • Lediga jobb
      HR kontakt
  • Kontakta oss
Mitt konto
Advanced Search
Search on Product Catalogue
  • Actuators
    • ISO Cylinders
    • Linear Actuators
    • Guided Actuators
    • Grippers & Escapements
    • Rotary Actuators
    • Rodless Actuators
    • Specialty Actuators
    • Actuator Accessories
  • Electric Actuators
    • Sliders
    • AC Servo Sliders
    • Rod & Guided Rod
    • AC Servo Rod & Guided Rod
    • Slide Tables
    • Rotary Tables
    • Grippers
    • Miniature
    • Controllers & Drivers
  • Directional Control Valves
    • Pilot Operated 4/5 Port Solenoid Valves
    • Pilot Operated 3 Port Solenoid Valves
    • Direct Operated 3/4/5 Port Solenoid Valves
    • Safety Pressure Release Valves (ISO 13849)
    • Fieldbus System
    • Air Operated Valves
    • Mechanical Valves / Hand Valves
    • ISO Valves
    • NAMUR Valves: 3 Port / 5 port / Hygienic
    • Accessories - Mufflers
  • Airline Equipment
    • Combination Units
    • Filter-Regulators
    • Filters
    • Regulators
    • Lubricators
    • Specialty Regulators
    • Pressure Gauges
    • Air Dryers
    • Air Preparation Filters
    • Auto Drain Valve
    • Blow Guns / Nozzles
    • Silencers / Exhaust Cleaners
  • Fittings & Tubing
    • Fittings
    • Flow Control Equipment
    • Tubing
    • Manifolds
    • Quick Couplers
    • Check Valves
    • Accessories
  • Vacuum Products
    • Vacuum Pads
    • Vacuum Ejectors
    • Vacuum Filters
    • Vacuum Switches
    • Vacuum Regulators
    • Vacuum Saving Valve
    • Other Vacuum Equipment
  • Fluid Control Equipment
    • Process Valves
    • Process Pumps
    • High Purity Products
    • Industrial Filters
    • Electro-Pneumatic Positioners
    • Water Equipment
  • Sensors & Switches
    • Pressure Switches
    • Vacuum Switches
    • Flow Switches
    • Auto Switch
  • Static Control
    • Bar Ionizers
    • Nozzle Ionizers
    • Fan Ionizers
    • Desktop Duster Box
    • Sensors
  • Temperature Control
    • Circulating Fluid Temperature Controller
    • Thermoelectric Bath
    • Temperature Control System for Chemical Liquids
    • Air Temperature Controller
  • High Vacuum Products
    • Angle and In-line Valves
    • Slit Valves
    • Smooth Vent
    • Solenoid Valves
  • Clean Room Products
    • Actuators
    • Airline Equipment
    • Connectors
  • ATEX Products
    • Actuators
    • Directional Control Valves
    • Airline Equipment
    • Fluid Control Equipment
    • Sensors & Switches
Index serier
A | C | E | F | G | H | I | J | K | L | M | P | R | S | T | V | W | X | Z
Kontakta oss
 
Hitta oss
Återförsäljare
 
SMC:s försäljningskontor
  Avancerad
Betygsätt den här sidan.
Skicka den här sidan
Skriv ut denna sida
Product Catalogue
Filter 
Filter products by
 A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
» All Products  · Vacuum Products
Vacuum Pads 
Vacuum Pads Only 

Adaptor & Cup-Vertical Entry 

Adaptor & Cup-Lateral Entry 

Adaptor & Cup-Lateral Entry
w/One-touch Fitting
 

Non-contact Grippers 

Vacuum Pad with Ejector 

Vacuum Ejectors 
ZK2 

New
  • Advanced vacuum unit (ejector/pump/manifold systems) with low noise and high efficiency options.
  • Energy-saving digital vacuum switch: Intermittent energizing (supply/exhaust) only when vacuum decreases.
  • More efficient 2-stage ejector: Air consumption 30 % reduced.
  • Dual 2 port valve (release valve/supply valve): Supply valve with self-holding function. Interlink between supply valve and release valve.
  • All-in-one design with integrated components to make it compact and lightweight.
  • Advanced vacuum unit (ejector/pump/manifold systems) with low noise and high efficiency options.
  • Energy-saving digital vacuum switch: Intermitte... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZH - NEW 

New
  • Body Ported Type Vacuum Ejector. Compact and lightweight.
  • Suction flow rate up to 155 l/min.
  • Nozzle diameters: 0.5, 0.7, 1, 1.3, 1.5, 1.8 and 2 mm.
  • Multiple piping variations. One-touch fittings: Metric size Ø 6, 8, 10 and 12 mm and Inch size Ø 1/4, 5/16, 3/8 and 1/2''. Screw-in connections: Ø 1/8 to 1/2 metric and inch size.
  • 4 mounting types: direct, standard bracket, L-bracket or DIN rail.
  • Accessories: silencer and brackets.
  • Body Ported Type Vacuum Ejector. Compact and lightweight.
  • Suction flow rate up to 155 l/min.
  • Nozzle diameters: 0.5, 0.7, 1, 1.3, 1.5, 1.... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZU-A 

New
  • In-line Type Vacuum Ejector. Compact and lightweight
  • Maximum vacuum pressure: -90 kPA
  • Nozzle diameters: 0.5 and 0.7 mm
  • Piping variations. One-touch fittings: Ø 6 mm. Screw-in connections: Rc 1/8.
  • In-line Type Vacuum Ejector. Compact and lightweight
  • Maximum vacuum pressure: -90 kPA
  • Nozzle diameters: 0.5 and 0.7 mm
  • Piping va... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZB 

Requests for a vacuum unit with fast workpiece absorption and improved transfer application performance have now been answered with the launch of our new compact vacuum ejector and pump unit - Series ZB. Developed initially for wafer and chip transfer applications, Series ZB is around 25% smaller than our alternative vacuum units and it´s also considerably lighter ? at only 46g for a single unit without sensor. Thanks to these reductions in size and weight, the ZB unit can now be mounted directly onto a machine´s moving component and as close as possible to the transfer workpiece - dramatically improving the vacuum absorption performance. Series ZB has also been constructed with separate vacuum and pressure paths which effectively reduce the chance of dust collecting in the filter element being discharged into the surrounding atmposphere via the units exhaust. Additional ZB features and options include a supply valve with latching specifications, a digital vacuum switch, with copy function, where up to 10 switches can be set simultaneously thereby saving installation time and potentially annoying individual input setting mistakes and the use of simple one-touch-fittings to connect a suction filter and silencer.
Requests for a vacuum unit with fast workpiece absorption and improved transfer application performance have now been answered with the launch of our new compac... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZQ 

When you already have one of the lightest and narrowest space saving ejector systems on the market, it´s difficult to see how you can improve it. But, our R&D engineers have once again come up with another great idea. By simply replacing the ejectors existing pressure switch with our ultra thin ZSE 10 digital pressure switch, input setting errors are dramatically reduced and with the units copy function, multiple stations can be easily copied and set from the master unit. Further performance benefits of this new combination are improved multi angled indicator visibility, easier operational handling (by replacing trimmers with buttons) and reduced energy consumption, by up to 20%, thanks to the units power saving function.
When you already have one of the lightest and narrowest space saving ejector systems on the market, it´s difficult to see how you can improve it. But, our R&D e... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZL 

The multi-stage ZL series is a high-efficiency vacuum generator, which operates at 150% efficiency (compared to about 40% for other units). For each scfm of compressed air it consumes, the ZL generates an incredible 1.587 scfm of suction flow. The ZL is available with a built-in vacuum switch with digital readout for design flexibility. Other features include built-in suction filter, exhaust silencer, and one-touch tube fittings. Its' compact design allows for mounting from three sides.
The multi-stage ZL series is a high-efficiency vacuum generator, which operates at 150% efficiency (compared to about 40% for other units). For each scfm of co... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZH 

Lightweight, point-of-use ZH and ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and vacuum is ready at the other end. The slim ZU generators are extra compact. The ZH and ZU immediate response may be quicker than central vacuum systems. Also, these generators are often smaller and lighter than the bulky vacuum lines used in central vacuum systems. A built-in exhaust silencer keeps generator noise to a minimum. Available in four nozzle diameters and a number of port sizes.
Lightweight, point-of-use ZH and ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and v... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZU 

ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and vacuum is ready at the other end. Also, these generators are often smaller and lighter than the bulky vacuum lines used in central vacuum systems. The slim ZU generators are extra compact. A built-in exhaust silencer keeps generator noise to a minimum. Available in four nozzle diameters and a number of port sizes.
ZU series vacuum generators combine design simplicity with high performance. Simply plug an air supply tube in one end, and vacuum is ready at the other end.... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZM 

The ZM series is an all-in-one vacuum generator, complete with internal suction filter, exhaust silencer, supply and break valve, and vacuum switch. Its dual-stage nozzle design increases suction flow by 40% over single-stage generators, yet its compact size makes it suitable for many different applications. ZM series generators also boast a strong vacuum break pressure for quick cycle times. Available in standalone or manifold configurations.
The ZM series is an all-in-one vacuum generator, complete with internal suction filter, exhaust silencer, supply and break valve, and vacuum switch. Its dual-... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZX 

The ZX is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZX is available with a combination of generator unit, supply/release valve unit, pressure switch unit, and suction filter unit. Order without the generator unit for use as a filter and valve assembly for house vacuum systems. Special function plates allow the use of shop air to create the vacuum, and nitrogen for the blow-off. Available in standalone or manifold configurations.
The ZX is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZX is available w... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZR 

The larger ZR is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZR is available with a combination of generator unit, supply/release valve unit, pressure switch unit, and suction filter unit. Order without the generator unit for use as a filter and valve assembly for house vacuum systems. Special function plates allow the use of shop air to create the vacuum, and nitrogen for the blow-off. Available in standalone or manifold configurations.
The larger ZR is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZR is avai... Learn more
Catalogues Documentation 3D Videos
Ask SMC
Vacuum Filters 
ZF 

New
Series ZF are air suction filters that prevent trouble in vacuum equipment caused by contaminants in the air. They are light weight and compact. ZF filter elements are easily replaced without tools.
Series ZF are air suction filters that prevent trouble in vacuum equipment caused by contaminants in the air. They are light weight and compact. ZF filter eleme... Learn more
Catalogues Documentation 3D Videos
Ask SMC
AFJ 

New
  • Large flow type AFJ-T, up to 660 l/min, for dust removal.
  • Water drop removal type AFJ-S, up to 500 l/min, for both dust and water droplets removal.
  • Filtration rating: 5, 40, 80 µm.
  • Port sizes: from 1/8 to 1/2.
  • Standard options: bracket; bowl material, selectable flow direction.
  • Large flow type AFJ-T, up to 660 l/min, for dust removal.
  • Water drop removal type AFJ-S, up to 500 l/min, for both dust and water droplets remov... Learn more
Catalogues Documentation 3D Videos
Ask SMC
Vacuum Switches 
ZSE20(F) 

New
  • 3-Screen Display High-Precision Digital Pressure Switch.
  • Applicable fluid: Air, Non-corrosive gas, Non-flammable gas.
  • Pressure range: -0.1 to 1 MPa.
  • Repeatability: ±0.2 % F.S.
  • Response time: 1.5 ms or less.
  • Consumption: 25mA or less.
  • 3-Screen Display High-Precision Digital Pressure Switch.
  • Applicable fluid: Air, Non-corrosive gas, Non-flammable gas.
  • Pressure range: -0... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZSE10 

Our new ZSE10(F)/ISE10 pressure switches really do fit the bill when lack of available machine space is an issue. Designed specifically with space savings in mind, and measuring only 9.8 mm width, they offer similar performance to our popular ZSE30A/ISE30A models but require around 50% less mounting space. Further features of these switches include a copy function where the setting of the master sensor can be copied on up to 10 slave sensors simultaneously resulting in reduced setting time and human setting errors. Also, all settings can be protected against unwanted manipulation using the switch's password setting function and with their improved multi ?angle direction visibility; vacuum suction and pressure checks can be made at a glance. Available in direct, panel and DIN rail mounting options and with side or rear piping directions, these digital pressure switches really lend themselves to multiple switch applications when panel space is restricted. And in keeping with our commitment to help save energy, these switches are also extremely energy efficient as they consume around 20% less power thanks to their in-built power saving function.
Our new ZSE10(F)/ISE10 pressure switches really do fit the bill when lack of available machine space is an issue. Designed specifically with space savings in mi... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZSE30A 

Series ZSE30A is a high-precision, 2-color display digital pressure switch for vacuum. It has raised rubber button controls that are clearly set apart, simple to operate and soft to the touch. Plug in type connectors take the burden out of wiring work and maintenance. Four different display settings are available.
Series ZSE30A is a high-precision, 2-color display digital pressure switch for vacuum. It has raised rubber button controls that are clearly set apart, simple... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZSE40A 

Based on our successful ZSE/ISE 40 Series, our new high precision digital pressure switch, Series ZSE40 A(F) / ISE40A, with dual colour display, offers even more high performance features. Now available with either NPN or PNP dual open collector outputs, or with the addition of an additional analogue output (voltage or current), the sensors improved copy function also allows you to simultaneously set up to 10 slave monitors whilst setting the master. With a simple to follow three step setting process and the addition of a password setting function, potential errors, lengthy setting time and unwanted manipulation are kept to an absolute minimum. Further features of the CE, UL/CSA and RoHS compliant ZSE40 A(F) / ISE40A include a power saving function, which reduces energy consumption by up to 20%, various piping options and direct or panel mounting capabilities.
Based on our successful ZSE/ISE 40 Series, our new high precision digital pressure switch, Series ZSE40 A(F) / ISE40A, with dual colour display, offers even mor... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZSE80 

To compliment and extend the existing SMC Digital Pressure Switch ranges, we are pleased to unveil our new Series ZSE/ISE 80 which has been specifically designed for use with a wide range of fluids thanks to its improved, corrosions resistant stainless steel, wetted part construction. Pressure ranges can easily be monitored via its dual colour display either in Vacuum (-0.1 to 0 MPa), Compound (-0.1 to +0.1MPa) or Positive (-0.1 kPa to +1 MPa, -0.1 kPa to +2 MPa) regimes, dependant on its application, and with the option of an analogue current output, this new switch makes remote location mounting a perfect selection.
To compliment and extend the existing SMC Digital Pressure Switch ranges, we are pleased to unveil our new Series ZSE/ISE 80 which has been specifically designe... Learn more
Catalogues Documentation 3D Videos
Ask SMC
PSE 

Series PSE digital pressure switches allow pressure to be controlled from a remote location. Series PSE540 is compact and lightweight, allowing the sensor to be mounted where needed. The use of stainless steel 316L for all wetted parts allows the PSE560 pressure sensor to be used in a wide variety of gas and fluid applications.
Series PSE digital pressure switches allow pressure to be controlled from a remote location. Series PSE540 is compact and lightweight, allowing the sensor to b... Learn more
Catalogues Documentation 3D Videos
Ask SMC
PS1 

The air checker, PS1 series, electronic pressure switch is available for positive pressure and for vacuum. PS1 is extremely compact and lightweight. Dimensions are 13W X 10H X 30L (mm) for standard type without connection part. A 2-wire switch is applicable to either NPN or PNP output.
The air checker, PS1 series, electronic pressure switch is available for positive pressure and for vacuum. PS1 is extremely compact and lightweight. Dimensions... Learn more
Catalogues Documentation 3D Videos
Ask SMC
PPA 

Compact Manometer
Catalogues Documentation 3D Videos
Ask SMC
ZSM1 

The ZSM1 series diaphragm type vacuum switch is available in a solid state non-contact or a reed type design. The ZSM1 has a response time of 100 ms. It is lightweight, compact and has a long life. The ZSM1 has a standard shield plate that prevents external interference.
The ZSM1 series diaphragm type vacuum switch is available in a solid state non-contact or a reed type design. The ZSM1 has a response time of 100 ms. It is lig... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZSE1 

The ZSE1 series is a compact, vacuum pressure switch available in a single setting with hysteresis adjustment, a double setting/ double output type or an analog output type with hysteresis adjustment. The ZSE1 is lightweight and the optional plug-in connector makes wiring easy and simple.
The ZSE1 series is a compact, vacuum pressure switch available in a single setting with hysteresis adjustment, a double setting/ double output type or an analo... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZSE2 

The ZSE2 series is a compact, pressure switch (for vacuum pressure) and can be integrated with ZX or ZR vacuum systems. The ZSE2 series pressure switch has a quick response time of 10mS and the plug connector option makes wiring easy and simple.
The ZSE2 series is a compact, pressure switch (for vacuum pressure) and can be integrated with ZX or ZR vacuum systems. The ZSE2 series pressure switch has a ... Learn more
Catalogues Documentation 3D Videos
Ask SMC
ZSE3 

The ZSE3 series is a digital pressure switch (for vacuum pressure) with LCD readout for general pneumatics purposes. The ZSE3 digital pressure switch allows the calibration of two independent outputs. Modular version can be integrated with ZX system.
The ZSE3 series is a digital pressure switch (for vacuum pressure) with LCD readout for general pneumatics purposes. The ZSE3 digital pressure switch allows ... Learn more
Catalogues Documentation 3D Videos
Ask SMC
Vacuum Regulators 
ITV 

Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. They are light weight in design with a bright and easy to read LED display. The monitor output is available either as analog output or switch output. The ITV series is IP65 equivalent.
Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. They are light weight... Learn more
Catalogues Documentation 3D Videos
Ask SMC
IRV 

The IRV series vacuum regulator was developed to upgrade the design of the T203 model in a more compact size and to expand the range of vacuum regulators. Thread sizes available include Rc(PT), NPT and G(PF).  The new and improved IRV10/20 series offers single sided connections for ease of installation and panel mounting. Built-in one-touch fittings include 6, 8, and 10mm and also 1/4", 5/16", and 3/8" for both fitting types elbow or straight. 
The IRV series vacuum regulator was developed to upgrade the design of the T203 model in a more compact size and to expand the range of vacuum regulators. Threa... Learn more
Catalogues Documentation 3D Videos
Ask SMC
Vacuum Saving Valve 
ZP2V 

New
Machine builders using vacuum for handling or pick and place applications now have an energy saving option with our new Series ZP2V vacuum saving valve. Developed initially for the semiconductor market, these new valves are designed to shut down the suction line when any leakage is detected from the vacuum pad not being fully aligned with the work piece or even when the work piece is simply missing. By effectively stopping the air suction when the system recognizes any irregularities, the energy used in making this vacuum is kept to an absolute minimum. And, without the need for a work piece detection mechanism ? which often use mechanical moving parts ? those unwanted surface scratches or marks on the work piece are now a thing of the past.Ideal for use as either a stand-alone single vacuum pad or for multiple vacuum pad applications where the vacuum pressure loss is reduced to a minimum and the work piece remains held by the rest of the operating pads, ZP2V users will also save money and time by eliminating the need for expensive sensors or a programmable logic controller (PLC) plus dramatically reduced labour costs when altering the control circuit to accommodate a different shaped work piece.
Machine builders using vacuum for handling or pick and place applications now have an energy saving option with our new Series ZP2V vacuum saving valve. Develop... Learn more
Catalogues Documentation 3D Videos
Ask SMC
Other Vacuum Equipment 
ZCUK 

The ZCUK series is a non-rotating free mount cylinder for vacuum applications. The ZCUK was created by providing a vacuum passage in the rod of the CUK cylinder to enable a vacuum pad to be installed on the end of the rod. A guide is provided as standard equipment. Vacuum pads are available with pad diameters of ø2 to ø50. Cap or rod piping is available to the rod side. Series ZCUK is available in 5 bore diameters.
The ZCUK series is a non-rotating free mount cylinder for vacuum applications. The ZCUK was created by providing a vacuum passage in the rod of the CUK cylinde... Learn more
Catalogues Documentation 3D Videos
Ask SMC
AMJ 

Series AMJ is effective for removing water droplets from the air sucked into vacuum pumps and ejectors. Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum. Even when the element is saturated with water, there is almost no drop in pressure (increase in resistance).
Series AMJ is effective for removing water droplets from the air sucked into vacuum pumps and ejectors. Over 90% of droplets can be removed through the use of ... Learn more
Catalogues Documentation 3D Videos
Ask SMC
GZ46 

SMC offers a variety of pressure gauges including general purpose, oil-free/external parts copper-free with limit indicator, clean series and a pressure gauge with a pressure switch. Pressure ranges vary from 0 to 1.5MPa, depending on the selected gauge. Panel mounting is possible.
SMC offers a variety of pressure gauges including general purpose, oil-free/external parts copper-free with limit indicator, clean series and a pressure gauge w... Learn more
Catalogues Documentation 3D Videos
Ask SMC
    • Produkter
      Produktkatalog (engelska)
      Nya produkter
      Standardprodukter i lager
      Aktuella produkter
      Standarder och manualer
      Digitala verktyg
    • Lösningar
      Fordonsindustri
      Elektronikindustri
      Life Science
      Livsmedelsindustri
      Gruvindustri
      Energy Saving
      Machine Safety
      Industry 4.0
      Utbildningsprogram
      Utbildningsavdelningen

      Återförsäljare
      Nyheter & Evenemang
      Press
      Nyhetsbrev
      Mässor/Event

    • Om oss
      Vilka vi är
      Vart vi finns
      Leveransbestämmelser

      Arbeta på SMC
      Lediga jobb
      HR kontakt

      Kontakta oss
    • Komplett sitemap

      Mobil site

      Dataskydd

      Copyright 2018 SMC Corporation

      Facebook LinkedIn YouTube myNewsdesk
      SMC Automation AB

      Telefon: (46) 08-603 12 00

      Fax: (46) 08-603 12 90

      E-post: order@smc.nu